Wall shelving unit with one drawer
2 bays · Natural · made to order in Norfolk, 5 to 10 weeks
£2,567.30incl. VAT
£2,567.30
Made to order in Norfolk 5 to 10 weeks from order
Ten-year warranty For defects in materials and workmanship
60-day Home Trial Under our Home Trial terms
Fitting tools included A spacer with a built-in level, plus drill and driver bits
Photos of the wall shelving unit
Natural
How the shelves hang.
Shelves and cabinets hang from pins in the rails, so each one can sit at any rail position and move later. There are two kinds of shelf, and you can pick either in the configurator.
On arms
A plywood arm sits against each rail with a pin through it, then the shelf lowers onto the arms.
Between bookends
Each bookend hangs on two pins, and the shelf sits between a pair of them. To switch, choose bookended shelves in the configurator’s Details step.
Dimensions and details.
Size and parts
- Overall
- W 1234 × H 1806 × D 415 mm
- Bays
- 2 × 600 mm
- Rails
- 3 × 1800 mm
- Shelves
- 8
- Cabinets
- 2 one-drawer cabinets
In the box
3 rails, 2 one-drawer cabinets and 8 shelves with their arms, plus the pins that hang them. The drawer cabinets arrive assembled; the rest comes flat-packed.
Tools: an alignment spacer with an integrated level, a masonry drill bit and a PZ2 driver bit. You supply the drill.
Wall fixings: we check your wall construction before confirming the fixing approach.
Materials and finish
Baltic birch plywood throughout, with its layered edges on show.
Finished in Rubio Monocoat Oil Plus 2C, Natural. The hardwax oil soaks into the birch so the grain shows, and worn spots can be re-oiled.
Pulls: circular hole, backed in Natural.
Lead time and delivery
Made to order in our Norfolk workshop, 5 to 10 weeks from order.
We deliver to addresses in the United Kingdom.
Warranty and Home Trial
A ten-year warranty covers defects in materials and workmanship, alongside your statutory rights.
Live with it for up to 60 days. If it isn’t right, we collect it under our Home Trial terms.
Fitting it yourself.
Install it yourself with our guidance. We check your wall type and provide personal help before and after delivery.
How it arrives
- Assembled
- 2 one-drawer cabinets, ready to hang
- Flat-packed
- 3 rails and 8 shelves with their arms
No assembly needed: the drawer cabinets arrive built, and each shelf goes up in parts as you hang it.
- Step 1Fix the first rail Hold it plumb with a level, then screw through all nine holes with fixings that suit your wall.
- Step 2Space the next rail The 602 mm gauge sets the gap and the level checks they line up. Screw beside the gauge first, then do the same for the last rail.
- Step 3Push in the pins One each side of the bay, in the hole the cabinet hangs from.
- Step 4Hang the cabinets Lift, push back to the wall and lower the hangers onto the pins.
- Step 5Hang the shelves Arms against the rails, a pin through each, then lower the board in. Repeat up the rails.
Every part lifts off again whenever you want to change it. Tools included: an alignment spacer with an integrated level, a masonry drill bit, and a PZ2 driver bit. You supply the drill.
Read the installation manualChange it now, or years from now.
Everything hangs on the rails, so this layout is a starting point. Move a shelf to any rail position, swap a cupboard for drawers, or add another bay next year.
Extra shelves, cabinets, and bays hang on the same rails, and replacement parts are sold individually.
Change it in the configuratorNot sure it fits? Plan it with us.
Send us your wall’s measurements and a photo. We check the fit and suggest a layout, free and with no obligation to buy.
